What is an unvented hot water cylinder?

The unvented hot water cylinder does not require a storage tank and
is connected directly to the mains supply.

When the water is heated any excess will be diverted to an expansion
tank, which is part of the same system.

This type of heating system obviously needs less space and as the
cylinder is supplied directly by the mains, it is likely to have stronger
water pressure.

Although this type of system does have advantages it is not always
compatible with certain other appliances such as power showers.

Torquay plumbers engineers are able to advise about which system is
the best suited for any type of property and can undertake installation
work on both types of system.

What is a vented hot water cylinder?

A vented hot water cylinder requires a water storage tank fed from
the mains, and is situated in the loft.

Gravity allows water to flow down to the hot water cylinder, which is
very often situated in an airing cupboard, by means of a vent pipe.

When the water is in the cylinder it is heated for use in taps or
radiators or will be stored for later use.

When water is heated it expands and so there needs to be some way it
can escape or overflow, hence the vent pipe to the tank in the loft.

The downside to this system is that it relies on gravity for the flow
rate of water to taps.
However, should there be an occasion when the water supply is
disconnected you will still have a tank full of water.

Vented + Unvented Hot Water Cylinder Repairs.

Installation of a vented system requires more components but can be
less expensive.

However, an unvented system, which will need less space, is more
complex and could work out to be a more expensive installation.

Both cylinder systems can be equally serviced and repaired if
necessary.

The vented system may at some stage require more repair or
replacement works due to the additional tank and vents.

There are positives and negatives for both systems but both work
effectively, providing a steady provision of hot water and heating.

Why choose Torquay Plumbers for vented + unvented hot water
cylinder repairs + installation services?

Torquay Pumbers plumbing and heating engineers are industry trained
and fully qualified to carry out all types of vented + unvented hot water
cylinder repairs + installations for domestic clients.

Our heating and plumbing engineers are fully qualified and we offer a
reliable and fully guaranteed hot water cylinder repair and installation
service to customers anywhere within the Torbay area.

We are trusted and experienced tradesmen, and we take pride in the
job and a job done well. We offer…

● 24 hour emergency call out for vented & unvented hot water cylinder
repairs
● Full vented + unvented hot water cylinder repairs & installation
service
● Comprehensive vented + unvented hot water cylinder repairs &
installations within the Torbay areas.
● 100% guarantees on all vented + unvented hot water cylinder
repairs + installations

                                    Tel. Mark: 07521390750

                                    Email:
Unvented Hot Water Cylinders
Tel. Mark: 07521390750

Email:
Unvented Hot Water Cylinder
What is an unvented hot water
cylinder?
The unvented hot water cylinder
does not require a storage tank and
is connected directly to the mains
supply.
When the water is heated any
excess will be diverted to an
expansion tank, which is part of the
same system.
This type of heating system obviously
needs less space and as the cylinder
is supplied directly by the mains, it is
likely to have stronger water
pressure.
Although this type of system does
have advantages it is not always
compatible with certain other
appliances such as power showers.
Torquay plumbers engineers are able
to advise about which system is the
best suited for any type of property
and can undertake installation work
on both types of system.

What is a vented is a vented
hot water system.
A vented hot water cylinder requires
a water storage tank fed from the
mains, and is situated in the loft.
Gravity allows water to flow down to
the hot water cylinder, which is very
often situated in an airing cupboard,
by means of a vent pipe.
When the water is in the cylinder it
is heated for use in taps or radiators
or will be stored for later use.
When water is heated it expands and
so there needs to be some way it can
escape or overflow, hence the vent
pipe to the tank in the loft.
The downside to this system is that
it relies on gravity for the flow rate
of water to taps.
However, should there be an
occasion when the water supply is
disconnected you will still have a
tank full of water.

Vented + Unvented Hot
Water cylinder repairs.
Installation of a vented system
requires more components but can be
less expensive.
However, an unvented system, which
will need less space, is more complex
and could work out to be a more
expensive installation.
Both cylinder systems can be equally
serviced and repaired if necessary.
The vented system may at some
stage require more repair or
replacement works due to the
additional tank and vents.
There are positives and negatives for
both systems but both work
effectively, providing a steady
provision of hot water and heating.
Why choose Torquay Plumbers for
vented + unvented hot water
cylinder repairs + installation
services?
Torquay Pumbers plumbing and
heating engineers are industry
trained and fully qualified to carry
out all types of vented + unvented
hot water cylinder repairs +
installations for domestic clients.
Our heating and plumbing engineers
are fully qualified and we offer a
reliable and fully guaranteed hot
water cylinder repair and installation
service to customers anywhere
within the Torbay area.
We are trusted and experienced
tradesmen, and we take pride in the
job and a job done well. We offer…
● 24 hour emergency call out for
vented & unvented hot water cylinder
repairs
● Full vented + unvented hot water
cylinder repairs & installation service
● Comprehensive vented + unvented
hot water cylinder repairs &
installations within the Torbay areas.
● 100% guarantees on all vented +
unvented hot water cylinder repairs
+ installations
What is an unvented hot water cylinder?

The unvented hot water cylinder does not require a storage tank and is connected directly to the mains supply.

When the water is heated any excess will be diverted to an expansion tank, which is part of the same system.

This type of heating system obviously needs less space and as the cylinder is supplied directly by the mains, it is likely to have stronger water pressure.

Although this type of system does have advantages it is not always compatible with certain other appliances such as power showers.

Torquay plumbers engineers are able to advise about which system is the best suited for any type of property and can undertake installation work on both types of system.

What is a vented hot water cylinder?

A vented hot water cylinder requires a water storage tank fed from the mains, and is situated in the loft.

Gravity allows water to flow down to the hot water cylinder, which is very often situated in an airing cupboard, by means of a vent pipe.

When the water is in the cylinder it is heated for use in taps or radiators or will be stored for later use.

When water is heated it expands and so there needs to be some way it can escape or overflow, hence the vent pipe to the tank in the loft.

The downside to this system is that it relies on gravity for the flow rate of water to taps.

However, should there be an occasion when the water supply is disconnected you will still have a tank full of water.

Vented + Unvented Hot Water Cylinder Repairs.

Installation of a vented system requires more components but can be less expensive.

However, an unvented system, which will need less space, is more complex and could work out to be a more expensive installation.

Both cylinder systems can be equally serviced and repaired if necessary.

The vented system may at some stage require more repair or replacement works due to the additional tank and vents.

There are positives and negatives for both systems but both work effectively, providing a steady provision of hot water and heating.

Why choose Torquay Plumbers for vented + unvented hot water cylinder repairs + installation services?

Torquay Pumbers plumbing and heating engineers are industry trained and fully qualified to carry out all types of vented + unvented hot water cylinder repairs + installations for domestic clients.

Our heating and plumbing engineers are fully qualified and we offer a reliable and fully guaranteed hot water cylinder repair and installation service to customers anywhere within the Torbay area.

We are trusted and experienced tradesmen, and we take pride in the job and a job done well. We offer…

● 24 hour emergency call out for vented & unvented hot water cylinder repairs
● Full vented + unvented hot water cylinder repairs & installation service
● Comprehensive vented + unvented hot water cylinder repairs & installations within the Torbay areas.
● 100% guarantees on all vented + unvented hot water cylinder repairs + installations



          Tel Mark: 07521390750
          Email: torquayplumbers@gmail.com
Gas Safety Check
Tel. Mark: 07521390750

Email:
Unvented Hot Water Cylinder
What is an unvented hot water cylinder?
The unvented hot water cylinder does
not require a storage tank and is
connected directly to the mains supply.
When the water is heated any excess
will be diverted to an expansion tank,
which is part of the same system.
This type of heating system obviously
needs less space and as the cylinder is
supplied directly by the mains, it is likely
to have stronger water pressure.
Although this type of system does have
advantages it is not always compatible
with certain other appliances such as
power showers.
Torquay plumbers engineers are able to
advise about which system is the best
suited for any type of property and can
undertake installation work on both
types of system.

What is a vented hot water cylinder?
A vented hot water cylinder requires a
water storage tank fed from the mains,
and is situated in the loft.
Gravity allows water to flow down to
the hot water cylinder, which is very
often situated in an airing cupboard, by
means of a vent pipe.
When the water is in the cylinder it is
heated for use in taps or radiators or
will be stored for later use.
When water is heated it expands and so
there needs to be some way it can
escape or overflow, hence the vent pipe
to the tank in the loft.
The downside to this system is that it
relies on gravity for the flow rate of
water to taps.
However, should there be an occasion
when the water supply is disconnected
you will still have a tank full of water.

Vented + Unvented Hot Water Cylinder
Repairs.
Installation of a vented system requires
more components but can be less
expensive.
However, an unvented system, which will
need less space, is more complex and
could work out to be a more expensive
installation.
Both cylinder systems can be equally
serviced and repaired if necessary.
The vented system may at some stage
require more repair or replacement
works due to the additional tank and
vents.
There are positives and negatives for
both systems but both work effectively,
providing a steady provision of hot
water and heating.
Why choose Torquay Plumbers for
vented + unvented hot water cylinder
repairs + installation services?
Torquay Pumbers plumbing and heating
engineers are industry trained and fully
qualified to carry out all types of vented
+ unvented hot water cylinder repairs +
installations for domestic clients.
Our heating and plumbing engineers are
fully qualified and we offer a reliable and
fully guaranteed hot water cylinder
repair and installation service to
customers anywhere within the Torbay
area.
We are trusted and experienced
tradesmen, and we take pride in the job
and a job done well. We offer…
● 24 hour emergency call out for vented
& unvented hot water cylinder repairs
● Full vented + unvented hot water
cylinder repairs & installation service
● Comprehensive vented + unvented hot
water cylinder repairs & installations
within the Torbay areas.
● 100% guarantees on all vented +
unvented hot water cylinder repairs +
installations